top of page

This is a bending iron based on a 4″ diameter billet (101.6mm)where you dictate the exact shape. You have the opportunity to design your bespoke bending iron which fits your personal requirements.

4" (100mm) Custom Bending Iron

  • My production methods mean that any shape required can be realised and you can dictate you personal requirements.  I am happy to produce you bending iron to your specific needs.  You can find out more about this here.

    The iron is produced from a solid billet of 6082 T6 aluminium bar and fitted with two 350watt heaters (making a total power of 700watt) facilitating an even distribution of heat, a quick heat up time and adequate maintenance of temperature in use The 250mm high irons are fitted with two 500watt heaters (making a total power of 1000watt) . There is a choice of 230v or 110v power, both being the same wattage.

    Beneath the iron is a piece of insulation which prevents excessive heat penetrating into the mounting box. This mounting box is custom made from 1/8” (3.2mm) thick aluminium which is TIG welded and in turn mounted on a base of 18mm birch ply. There is a choice of a tried and tested analogue thermostat (standard) or a digital thermostat to control the temperature.  Power is supplied through a braded flex to resist the effects of heat; this is available in standard length of 1.5metre (standard length) or 2.5 metre (extra length).

    There are many other shapes and sizes of irons available and I am happy to construct any iron to your particular requirements if that is necessary click here

    If you have any questions about this or any other products Click Here

bottom of page